2.4GHz High-Powered MiMo Integrated Device(APC 2S-20)_FUNCTION (HUIZHOU) TELECOMMUNICATIONS CO.,LTD

Products

Tel : 86-0752-5336688

Fax : 86-0752-2601958

E-mail: info.hz @ function-g.com

Http://www.functiongroup.com

Outdoor

Type: Outdoor
Model: APC 2S-20

Product Description

Wireless
WLAN standard	IEEE 802.11 b/g/n
Radio mode	SISO 1x1
Operating modes	Client, Client WDS, Access point, Access point WDS
Radio frequency band	2.4 GHz
Transmit power	Up to 27 dBm
Receive sensitivity	Varying between -94 and -70 dBm depending on modulation
Channel size	20, 40 MHz
Modulation schemes	802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK) 802.11 b: DSS (CCK, DQPSK, DBPSK)
Data rates	802.11 n: 150, 135, 120, 90, 60, 45, 30, 15 Mbps 802.11 g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11 b: 11, 5.5, 2, 1 Mbps
Error correction	FEC, Selective ARQ, STBC
Duplexing scheme	Time division duplex
Antenna
Type	Integrated directional or sector
Gain (directional)	20 dBi
Wired
Interface	10/100 Base-T, RJ45
Built-in surge protection	Yes
Networking
Operating modes	Bridge, Router
WAN	Static IP, DHCP client, PPPoE client
NAT	Routing w/ or w/o NAT
Static routing	Supported
DHCP	Client, Server, Relay
Port forwarding	Supported
VLAN	Supported for management and data
Security
Wireless security	WEP, WPA/WPA2 Personal, WPA/WPA2 Enterprise, WMM, WACL
User isolation	Supported
Software
General	Ability to define/limit frequency, channel width, EIRP, modulation All configurations are instant changes
Operating mode	Router, Bridge
Wireless operating modes	AP, Station, AP WDS, Station WDS, Virtual radios (VSSID)
Wireless security	WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, User isolation
Wireless QoS	WMM
WAN protocols	Static IP, DHCP client, PPPoE client
Network	NAT, static routing, firewall, port forwarding, VLAN
Services	DHCP server, SNMP server, NTP client, Alerts, Remote syslog, Wireless and Ethernet statistics, bandwidth limiting
Management	HTTP(S) GUI, SSH CLI, SNMP read, WNMS, troubleshooting file, reset via ICMP
Tools	Site survey, Link test, Antenna alignment, Ping, Traceroute
Physical
Power supply	8 - 18 V DC passive PoE
Power source	100 – 240 VAC via included adapter
Power consumption	12 W
Environmental
Operating temperature	-20°C (-4 F) ~ +55°C (+131 F)
Humidity	0 ~ 90 % (non-condensing)
Management
System configuration	User-friendly web GUI, Command line via SSH, centralized Wireless Network Management System, reset to defaults via special ICMP packet
System monitoring	SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap
Regulatory
Certification	FCC/CE (*pending)
Safety	RoHS compliant